Configuration Checklist - Ricoh SP 4510DN User Manual

Configuration Checklist

The information in this chapter applies to all users.
1. Write down the NIC MAC address. The Ethernet MAC address is on the printer controller.
If you are using TCP/IP, see the manual explaining the network functions provided by the
supplier.
2. Power off the printer and connect the NIC to the LAN cable.
3. Power on the printer. Verify the connection to the LAN cable.
4. Configure your environment. Refer to one of the chapters in the following list.
Windows
page 11 "InfoPrint Manager for Windows"
System i
page 15 "Configuring System i for an IPDS Printer"
z/OS
page 25 "Sharing the PSF/400 Printer on the Network"
AIX
page 40 "Sharing the Network Printers on z/OS"
Configuration Checklist
9