Presentation Fidelity Control; Text Fidelity Control - Ricoh SP 4510DN User Manual

1. Device Control Command Set

Presentation Fidelity Control

The Presentation Fidelity Control (PFC) command is only valid in home state and specifies the fidelity
requirements for certain presentation functions. The desired fidelity for each supported presentation
function can be specified with a triplet on the PFC command. The activate flag can be used to reset all
fidelity controls to their default settings before activating the settings specified in the PFC triplets. A PFC
command with no triplets and with the activate flag set to B'0' resets all fidelity controls to their default
settings.
Offset Range
0 X'00'
1
Bit 0
0
1
Bits 1-7
0000000
0000000
2-3 X'0000'
4-n

Text Fidelity Control

The Text Fidelity triplet specifies the exception continuation and reporting rules when an unrecognized or
unsupported text control sequence is encountered.
Offset Range
0 X'07'
1 X'86'
46
RESERVED
FLAGS
ACTIVATE
Reset to default fidelity controls and activate PFC triplets
Reserved
Reserved
Triplets (Zero or more optional PFC triplets)
X'86' Text Fidelity Control
X'88' Finishing Fidelity Control
LENGTH
Text Fidelity Triplet ID
Meaning
Meaning
Error Code
X'0254..0
5'
Error Code
X'0254..5
1'