Image Output Control - Ricoh SP 4510DN User Manual

Offset Range
8-9
X'0000'
X'2D00'
X'5A00'
X'8700'
10
X'00'
X'20'
X'40'
X'60'
X'A0'
11-n

Image Output Control

This data structured field specifies the mapping option for the image object. It is an ELECTIVE data field
in the Write Image Control 2 command. If this field is omitted, the printer will use the following default
values:
Mapping option = X'30' (Position and Trim)
X, Y Offset = 0.
X, Y Extent = Image Presentation Space extent defined by the Image Data Descriptor structured field.
Offset Range
0-1 X'0010' -
X'xxxx'
2-3 X'A66B'
ORIENTATION OF IMAGE BLOCK
0 degrees
90 degrees
180 degrees
270 degrees
COORDINATE REFERENCE SYSTEM
Absolute I, absolute B
Absolute I, relative B
Relative I, absolute B
Relative I, relative B
Page Xp, Yp
Ignored
LENGTH of Image Output Control
Structured Field ID
Meaning
Meaning
IO Image Commands
Error Code
X'0203..0
5'
X'0204..0
5'
Error Code
X'0202..0
5'
X'020B..
05'
137