Before Using This Printer - Ricoh SP 4510DN User Manual

1. Getting Started

Before Using This Printer

This section explains how to enable encryption of transmitted data and configure the administrator
account. If you want a high level of security, make the following setting before using the printer.
Press the [Menu] key, and then select setting items using the [ ] or [ ] key.
1. Turn the printer on.
2. Press [Menu].
3. Select [Host Interface]
4. Select [Network]
5. Select [Machine IPv4 Address]
6. Specify IPv4 Address.
For details about how to specify the IPv4 address, see "Ethernet Configuration", Operating
Instructions.
7. Be sure to connect this printer to a network that only administrators can access.
8. Start Web Image Monitor, and then log in to the printer as the administrator.
For details about logging in to Web Image Monitor as an administrator, see page 23
"Administrator Login Method".
9. Point to [Device Management], and then click [Configuration].
10. Click [Email] under "Device Settings".
11. Enter the e-mail address of the administrator of this printer in "Administrator Email
Address" and click [OK].
12. Install the device certificate.
For details about how to install the device certificate, see page 116 "Protecting the
Communication Path via a Device Certificate".
12
CYN042
Press [OK]
Press [OK]
Press [OK]