Full System Test; Memory Tests - Xerox 8830 Service Manual

Full System Test

Selecting the Full System Test button displays the Full System Test
screen (Figure 6-9). This test operates the complete set of diagnostic
tests. Each test is reported as "Passed" or Failed". The test currently
being operated is shown as "Running". Tests that have not yet been
done have no results displayed.
Selecting the Begin button will start the sequence of tests again.
Figure 6-9. Full System Test Screen
7356 Scanner
The Exit button returns to the Service Diagnostic Menu screen.

Memory Tests

The Memory Tests screen (Figure 6-10) is accessed by selecting the
Memory Tests button on the Service Diagnostics Menu screen or the
Full System Test screen.
• Selecting the Begin button will start the tests. Each test will be
executed, and evaluated as Passed or FAILED. When the last test
is complete, the first test is executed again.
• The tests may be stopped at any time by selecting the Stop button.
• The System Tests button returns to the Full System Tests screen.
4/97
6-9 Diagnostics