Xerox 8830 Service Manual page 170

Hide thumbs Also See for 8830:

Table of Contents

(Figure 5): Reinstall the bracket (Left side).

Reinstall the screws

and the bracket

Figure 5. Reinstalling the Bracket (Left

(Figure 6): Reinstall the grommet and the

bracket (Right side).

Reinstall the bracket on

to the grommet

Reinstall the screw and 4

Figure 6. Reinstalling the Bracket

(Right side)

Reinstall the grommet

onto the Heat Rod wire

connector and put the

wire into the clamp

Ensure that the Thermistor Pad is clean.

Show Quick Links

Chapters

Table of Contents