Xerox 8830 Service Manual page 491

Status Indicator
STATUS CODES
Go to the Status Code Entry Chart of the
equipment displaying the fault.
MESSAGE DISPLAY
Go to the Message display Entry Chart of the
equipment displaying the message.
Initial Action/System Checks
1. Ask the operator to describe the problem.
2. If the scanner is part of a Copier / printer system, ask the operator to stop all print jobs.
3. If the scanner is a standalone 7356, a laptop computer may be required to diagnose and repair the fault.
4. If available, check the Log Book.
5. Attempt to duplicate the problem.
Refer to the Print Defect Isolation Procedure
Print Quality
2/98
1-4
Other Faults
1.0 Entry RAP
7356 Scanner