Xerox 8830 Service Manual page 147

NOTE: To ensure that the Toner Cartridge is
correctly engaged in the Drive Plate, rotate the
cartridge in both directions.
6. (Figure 8): Reinstall the Toner Cartridge.
5
Slide the Top
Shield closed
Figure 8. Reinstalling the Toner Cartridge
8830
7. If new Developer Material has been installed,
perform Toner Sensor Calibration Code [09216].
8. Perform the Electrostatic Series (ADJ 9.2).
Partially rotate the
Toner Cartridge in
both directions to
ensure that the
cartridge is locked
in the Drive Hub
Reinstall the Toner
Cartridge while
performing Step 2
1/98
4-63
2
Pull the
plunger
REP 9.7