Xerox 8830 Service Manual page 355

9.7 TONER/DEVELOPER DISPENSE (2 OP 2)
CARTRIDGE HOME SENSOR
MAGNETIC ACTUATION
TONER/DEVELOPER
CARTRIDGE
CUSTOMER
INSTALLED
CARTRIDGE
INPUT POWER BLOCK
+5 VDC SUPPLY (A5) J3-14
DC COM SUPPLY (A5) J3-11
+28 VDC (BULK) SUPPLY (A5) J3-14
DC COM SUPPLY (A5) J3-17
8830
CARTRIDGE
OPENING
CARTRIDGE
DRIVE BUTTON
DISPENSED
TONER/
TONER SENSOR
DEVELOPER
A22Q1
VIEW: RIGHT REAR
TONER / DEVELOPER DISPENSE DIAGNOSTIC CODES
TONER HOME SENSOR: (INPUT)
TONER MOTOR: (OUTPUT)
DISABLE OF TONER FAULTS THIS ENABLES THE MACHINE TO BE
OPERATED UNTIL THE TC COMES BACK WITHIN THE ACCEPTABLE
RANGE. THE MACHINE WILL AUTOMATICALLY CLEAR OUT THIS
LOCATION WHEN THAT OCCURS.
CYCLE TONER / DEVELOPER CARTRIDGE: (OUTPUT) THIS WILL CYCLE
THE CARTRIDGE ONE TIME. THE TONER / DEVELOPER CARTRIDGE WILL
BE IN THE HOME POSITION WHEN THIS TEST IS COMPLETE.
1/98
7-71
DEVELOPER
MODULE
DEVELOPER HOUSING
WARNING
THE DEVELOPER MODULE HAS
APPROXIMATELY -350 VOLTS DC
APPLIED TO ITS SURFACE. USE CAUTION.
DISPENSED
DEVELOPER
Chain 9 Xerographics
TONER/