Change Tag/Mod Index - Xerox 8830 Service Manual

Change Tag/MOD Index

Introduction
All important modifications are identified by a
Tag/ MOD number on a matrix label attached to
each Scanner inside the Top Cover (see Figure
1).
This section describes all the tags as well as
multinational applicability, classification codes,
and permanent or temporary
information.
Classification Codes
A Tag/ MOD number may be required to identify
differences between parts that cannot be
interchanged, or differences in diagnostic, the
repairs, installation, or adjustment procedures.
A Tag/ MOD number may also be required to
identify the presence of optional hardware,
firmware, or If mandatory modifications have
been installed. Each Tag/ MOD number is given
a classification code to identify the type of a
change the Tag/ MOD has made.
Mandatory
M-
N- Not installed in the field
0-
Optional
R- Repair
S-
Situational
Scanner Installation
modification
Figure 1. Location of the Change Tag/MOD Matrix
4/97
6-30
TAG/MOD MATRIX
7356 Scanner