Configuring Control Protocol Of Analog Camera - Sony NSR-1100 User Manual

(Send Backward)
Use this button to move the selected mask down one
level in a stack of overlapping masks.
(Remove Area)
Use this button to delete the selected mask.
(Refresh Image)
Use this button to refresh the still image that includes
all the masks.
(Preview)
Use this button to display live images from the camera
that includes the mask.
This allows you to confirm how the configured area
will appear.
H Apply
This saves the settings.
I Cancel
This cancels the changes to the settings.
J Close
This closes the screen.
Configuring Control Protocol of
Analog Camera
When an SNT-V704 is used or an NSR-1050H or NSBK-
A16 (option) is connected, configure the control protocol
of the connected analog camera to control the pan, tilt, and
zoom.
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the analog camera, and click the [Control] tab.
3
Configure each item.
12
1 Select a protocol in accordance with the analog
camera.
2 Enter the control number configured for the analog
camera selected in the tree.
3 Click [Apply].
Controlling the pan, tilt, and zoom on the analog
camera becomes possible.
Note
Make sure that the serial port is configured according
to the analog camera you are using. You can configure
the serial port from the Setup Menu of the
Administration Menu.
3
Configuring Camera Operations
51