Heat Gains (Tf) - Siemens RVA63.280 Basic Documentation

Benefit
Description
Setting
Note
Effect
150/184
Siemens Building Technologies
Landis & Staefa Division
3.19

Heat gains (Tf)

To save energy, heat gains are taken into consideration.
This setting takes into account potential heat sources such as machines, pieces of
equipment, intense solar radiation, or similar, that might adversely affect accurate
control.
Setting range
-2...+4
Heat gains are automatically considered by the controller. This means that manual
settings can be changed by the controller.
Compensation of potential constant heat sources.
Entry:
Increase: For more compensation
In the case of significant heat sources
Decrease: For less compensation
In the case of less significant heat sources
Basic Dokumentation RVA63.280, RVA53.280
Unit
°C
Factory setting
0
CE1P2374E
19.04.2001