Field Of Use; Product Liability - Siemens RVA63.280 Basic Documentation

Target market
Types of buildings
Types of heating systems
Heat generating
equipment
Siemens Building Technologies
Landis & Staefa Division
1.4

Field of use

• OEMs
• Manufacturers of combi and heating boilers
• Residential and non-residential buildings with own zone heating and d.h.w. heating
facility
• Residential and non-residential buildings with central heating plant
• Standard heating systems, such as:
radiator, convector, underfloor and ceiling heating systems, and radiant panels
• Suited for
– heating plants with 2 heating circuits
– different types of heating systems (creation of extensive systems)
– several heating zones (creation of extensive systems)
• With or without d.h.w. heating
• Heating boilers with single- or 2-stage oil or gas burners
• Gas boilers with BMU
1.5

Product liability

• The products may only be used in building services plant and applications as
described above
• When using the products, all requirements specified in "Technical data" and
"Handling" must be satisfied
• When using the products in a system, all requirements contained in the
documentation "Local Process Bus (LPB), Basic Documentation, System
Engineering" (document no. CE1P2370E) must be satisfied
• The local regulations (for installation, etc.) must be complied with
Basic Dokumentation RVA63.280, RVA53.280
(Boiler Management Unit)
11/184
CE1P2374E
19.04.2001