Optional Applications; Starting Application Use - Kyocera ECOSYS M2040dn Operation Manual

Appendix > Optional Equipment

Optional Applications

The applications listed below are installed on this machine.
NOTE
• Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
• If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.

Starting Application Use

1
2
Application
Card Authentication Kit
*1
ThinPrint Option
*1 This can be used on a trial basis for a limited time.
Display the screen.
1
[System Menu/Counter] key > [▲] [▼] key > [System/Network] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M2135dn/ECOSYS M2635dn/
ECOSYS M2635dw
ECOSYS M2040dn/ECOSYS M2540dn/
ECOSYS M2540dw
2
[▲] [▼] key > [Op Functions] > [OK] key
Activate the application.
1
Select the desired application, and select the [OK] key.
NOTE
You can view detailed information on the selected application by selecting [Menu] >
[▲] [▼] key > [Detail] > [OK] key.
2
[▲] [▼] key > [Official] > [OK] key
To use the application as a trial, select [Trial] without entering the license key.
3
Enter the license key > [OK] key
Some applications do not require you to enter a license key. If the license key entry screen does not
appear, go to Step 6.
Login User Name
3500
4000
11-6
Login Password
3500
4000