info@Fluke-Direct.com
64 Max
Users Manual
•
If the memory is full, the feature cannot be switched ON.
•
When the feature is on, AUTO CAPTURE shows on the display when the
Product is in SCAN and HOLD status.
•
When records are saved into memory, the new data will be saved starting
from the first empty memory location until all 99 positions are used.
Set Temperature Units
To set the temperature units:
1.
In HOLD status, push the SEL button for >3 seconds to enter the second-level menu.
2.
Push SEL several times until °F or °C shows on the display.
3.
Push SET to toggle the units.
4.
Push SEL or pull the trigger to accept the format.
22
Fluke-Direct
.com
1.888.610.7664