System Configuration; Hardware Configuration - Denso BHT-500B User Manual

BHT-500B

1.1 System Configuration

This section describes the hardware required for the barcode data collection system used by the BHT and the BHT
software.

1.1.1 Hardware Configuration

In addition to the BHT, the following hardware and software are required for the barcode data collection
system used by the BHT.
Please note that certain components of the required hardware will differ depending on the type of
communication used.
 Host computer
 CU-500 Series (option): Optical communication unit
 Connection cable (option): Used to connect the BHT and host computer.
 Wireless LAN access point (option) *
 Software: BHT-BASIC 4.0 Development Pack (Option) and BHT-BASIC 4.0 Transfer Utility (Option)
(3) Wireless
communication *
● : Required for system configuration
Host computer
(1)Connector
communication
(2) Infrared
communication
(3) Wireless
communication *
2
BHT
(1) Connector
(2) Infrared
communication
CU(option)
Wireless LAN access point
(option)
BHT
● ●
● ●
● ●
Host computer
communication
* BHT-504BW only
Wireless LAN
CU
access point
— —
● —
— ●
BHT-BASIC 4.0
Development Pack
(Option)
BHT-BASIC 4.0
Transfer Utility
(Option)
Software Ref. Page
● Page 34
● Page 35
● Page 36