Denso BHT-500B User Manual page 149

BHT-500B
3.
Ensure that [1: PRE SHARED KEY] is highlighted and then press the
The mode changes to entry mode and the cursor displays.
4.
Use the numerical k ys to enter a shared key and p
P ress the SF key to change the entry mode (numerical entry (no guidance display) a
To delete a single character, press the BS/C key.
Press and hold the BS/C key to delete all entries made.
5.
Press and hold the BS/C
6.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
WPA CIPHER] and then press the ENT key.
The screen on the right displays.
[1 : CIPHER MODE]:
7.
Ensure that [1: CIPHER MODE] is highlighted and then select TKIP
or AES.
Select TKIP to use TKIP.
Select AES to use AES.
8.
Press the ENT key or press an
S ET RF PARAMETER menu.

W ireless Security WPA2-1x Mode (when Equipped with Softwa
E AP authentication and an encryption system can be used with wireless security W
1.
Select "2: CONFIGURATION" at the SET SECURITY menu and
then press the ENT key.
The screen on the right displays.
[1 : AUTH PARAM (EAP)]:
[2: WPA CIPHER]:
P ress and hold the BS/C key to return to the SET SECURITY menu.
132
e
key to return to the SET RF PARAMETER menu.
Selects TKIP or AES.
d hold the BS/C key to return to the
EAP authentication parameter setting
Encryption system s
ress the ENT key.
etting
ENT key.
nd alphabet entry).
re Supporting WPA2)
PA2-1x mode.