Updating The System (Modify Menu) - Denso BHT-500B User Manual

BHT-500B
4.5.15

Updating the System (MODIFY MENU)

Use the following procedure to update the system.
1.
Press the dot key while holding down the SF key at the SYSTEM
MENU.
T he MODIFY MENU screen on the right displays.
[1 : SYSTEM MODIFY]:
[2 : CU-F/W MODIFY]:
R efer to the following section for details of the above items.
Press and hold the BS/C key to return to the SYSTEM MENU.
[1] Updating the BHT system
Update the BHT system after downloading the BHT system update file.
(Refer to section "4
1.
U se the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight
[1 : SYSTEM MODIFY] and then press the ENT key.
T he screen on the right displays.
If the downloaded BHT update file name differs from this file name, specify
th e correct file name using the procedure on the following page.
[1: DO IT]:
Updates the BHT system.
[2: FILENAME]:
Displays the filename to be used for updating the BHT system.
P ress and hold the BS/C key to return to the SYSTEM PARAMETER
m enu.
2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight
[1: DO IT] and th
T he screen shown on the right displays and the BHT system is updated.
Up on comp tion of the update, the BHT power turns OFF automatically. le
148
Updates the BHT system.
Updates the CU-511 system.
(when equipped with software supporting
LAN communication)
.2.1 Updating the BHT System" for details.)
en press the ENT key.