Denso BHT-500B User Manual page 125

BHT-500B
Upon completion of the PING test, the screen on the right displays.
The PING result may include the following:
OK: Displays the number of echo replies.
[XXXXX]: Echo reply time in milliseconds
NG: Displays the number of errors found during the PING test.
TIMEOUT: Displays the number of timeouts (for echo re
place during the PING test.
IP: Displays the BHT IP address du
M essages displayed during PING test (displayed in center of screen)
Waiting:
Opening device:
Routing TCP/IP:
PING start:
Device error:
TCP/IP error:
PING termination messages (displayed at bottom of screen)
PING end:
PING abo rted:
PING error:
108
ring the PING test only.
Setting up the PING test.
Opening devices.
Connecting to the TCP/IP communication pathway.
Starting the PING test.
Failed to open a device.
Failed to connect to the TCP/IP communication pathway.
The PING test has ended normally.
The PING test has been aborted.
An error has occurred during the PING test.
plies) that took