Denso BHT-500B User Manual page 152


W ireless Security WPA2-PSK Mode (when Equipped with Software Supporting WPA2)
PSK authentication and an encryption system can be used with wireless security WPA2-PSK mode.
1.
Select "2: CONFIGU
then press the ENT key.
The screen on the right displays.
[1: AUTH PARAM (PSK)]: PSK authentication parameter setting
[2: WPA CIPHER]:
Press and hold the BS/C key to return to the SET SECUR
2.
Use the cursor keys ([▲] [▼])
A UTH PARAM (PSK)] and then press the ENT key.
The screen on the right displays.
[1:PRE SHARED KEY]:
3.
Ensure that [1: PRE SHARED KEY] is highlighted and then
the ENT key.
The mode changes to entry mode and the cursor display
4.
Use the numerical keys to enter a shared key and press the ENT
key.
Press the SF key to change the entry mode (numerical entry (no guidance di
To delete a single character, press the BS/C key.
Press and hold the BS/C key to delete all entries made.
5.
Press and hold the
6.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
WPA CIPHER] and then press the ENT key.
The screen on the right displays.
[1:CIPHER MODE]:
7.
Ensure that [1: CIPHER MODE] is highlighted and then select TKIP
or AES.
Select TKIP to use TKIP.
Select AES to use AES.
RATION" at the SET SECURITY menu and
Encryption system setting
or numerical key ([1]) to highlight [1:
Sets the shared key.
key to return to the SET
BS/C
Se lects TKIP or AES.
Barcode Handy Terminal
ITY menu.
press
s.
splay) and alphabet entry).
RF PARAMETER menu.
135