Denso BHT-500B User Manual page 154

[2] Site Survey Menu
1.
Select "2: SITE SURVEY" at the RF MENU and the
the ENT key.
The SITE SURVEY screen on the right di
Press and hold the BS/C key to return to the RF MENU screen.
2.
Press the ENT key.
The current communication status displays in real time.
[A SSOCIATED AP]:
Displays t he MAC address of the wireless interface for the associated
access point.
[SIGNAL STRENGTH]:
Displays the signal strength of received packets.
[L INK QUALITY]:
Displays the overall communication qualit
Display
EXCELLENT
GOOD
FAIR
POOR
NOT ASSOCIATED
[CHANNEL]:
Displays the c rrent communication channel. u
Press and hold the BS/C key to retur
[3] RF Version
1.
Select "3: VERSION" at the RF MENU and
the ENT key.
The screen on the right displays after information is acquired.
[V X.XX]: Wireless module firmware version
[MACID]: Wireless module MACID
Press and hold the BS/C key to return to the RF MENU.
splays.
y with the access point.
Communication Status
Excellent communication link
Poor communication link
Not associated with an access point
n to the SITE SURVEY menu.
Barcode Handy Terminal
n press
then press
137