Table of Contents
Advertisement
BHT-500B
"2: PROTOCOL": Communication protocol option menu
Select "2: PROTOCOL" to display the screen shown on the right.
The highlighted settings will be the current settings.
"1: SERIAL No.":
Selects whether or not to add serial numbers to data blocks.
"2: H.PARITY":
Selects whether or not to add horizontal parity.
"3: LINKUP TIME":
Selects the timeout length (in seconds) to be applied when a link is to be
established.
"4: FIELD SPACE":
Specifies the handling for trailing spaces in fields.
To trim trailing spaces in fields, select "Ignore", and to retain them as data, select "Data".
To make changes, use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4]) to highlight the item to
be set, highlight the setting value using the cursor keys ([◄] [►]), and then press the ENT key.
Press and hold the BS/C key to return to the SET CONNECTOR menu.
Selecting the BHT-Ir or YMODEM protocol ignores the serial number and horizontal parity
- Point -
settings.
80
Advertisement
Chapters
Table of Contents
