Denso BHT-500B User Manual page 167

BHT-500B
[2] Updating the CU-511 system (when equipped with software supporting LAN communication)
Update the CU-511 system after downloading the CU-511 system update file.
(Refer to section "4.2.2 CU-511 System Update (when Equipp
details.)
1.
Use the cursor
[2: CU-F/W MODIFY] and then press the ENT key.
The CU-F/W MODIFY menu screen on the right displays.
[1: DO IT]:
Updates the CU-511 system.
[2: FILENAME]:
Displays the filename to be used for updating the CU-51
[TRANSMIT SPEED]
Select 460800(bps).
P ress and hold
menu.
2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight
[1: DO IT] and then press the ENT key.
The screen shown on the right displays and the CU-511 system
T he screen on the right displays upon completion of the update.
P ress and hold the BS/C key to return to the CU-F/W MODIFY menu.
 When the Displayed File Name Differs from the CU-511 System Update File
If the name of the file displayed at [2: FILENAME] differs from the name of the CU-511 system update file
to be used for updating the system, enter the correct file name.
1.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: FILENAME] and then press
the ENT key.
The mode changes to entry mode and the cursor displays.
2.
Use the numerical keys and dot key to enter the correct file name.
Press the SF key to change the entry mode (numerical entry (no guidance display) and alphabet entry).
To delete a single character, press the BS/C key.
Press and hold the BS/C key to delete all entries made.
3.
Press the ENT key to set the entered file name.
150
keys ([▲] [▼]) or numerical key ([2]) to highlight
the BS/C key to return to the SYSTEM PARAMETER
ed with LAN Communication Software)" for
1 system.
is updated.