Denso BHT-500B User Manual page 160

[2] Uploading the BHT system parameter file
1.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight
[2: UPLOAD] and then press the ENT key.
The screen on the right displays indicating that the BHT is waiting for the
system parameter file to be uploaded.
2.
While the upload is in progress, the screen on the right displays
ind icating the file name and the number of sent records/the total
nu mber of records.
Press and hold the BS/C key to abort the upload and return to the
SYSTEM PARAMETER menu.
3.
Upon completion of uploading, the BHT displays the screen shown
on the right and beeps once.
Press and hold the BS/C key to return to the SYSTEM PARAMETER
menu.
The beeper sounds three times if an error occurs during uploading, and an
error screen displays.
Refer to "Chapter 7 Error Messages" - "7.2 System Mode Errors" and
remedy the error.
Barcode Handy Terminal
143