Denso BHT-500B User Manual page 139

BHT-500B
 Wireless Network Parameter Settings
1.
Select "1: NETWORK
menu and then press the ENT key.
The screen on the right displays.
[1: SSID]: Displays the current Service Set
Refer to "Chapter 5 Communication" – "5.3 Wireless Commu
details on the Service Set ID.
2.
E nsure that [1: SSID] is highlighted and press the ENT key.
The mode changes to entry mode and the cursor displays.
3.
U se the numerical keys and dot key to enter the Service Set ID.
Press the SF key to change the entry
To delete a single character, press the BS/C key.
Press and hold the BS/C key to delete all entries made.
4.
Enter the Service Set ID and press the ENT key.
T he entered Service Set ID is set.
5.
Press and hold the S/C key to return to the SET RF N

Wireless Network Option Settings
1.
S elect "2: RF OPTION" at the SET RF NETWORK menu and then
press the ENT key.
The screen on the right displays.
The highlighted settings are the current settings.
[1: POWER SAVE]:
[2: RADIO MODE]:
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to highli
the ite m to be set.
3.
Use the cursor ke
4.
Press the ENT key or press and hold the BS/C key to return to the SE
Refer to "Chapter 5 Communication" – "5.3 Wireless Communication
items.
122
PARAMETER" at the SET RF NETWORK
ID.
mode (numerical entry (no guidance display) and alphabet entry).
B
Sets p ower saving mode.
Sets the wireless mode.
ys [◄] [►]) to highlight each setting value. (
nication" for
ETWORK scre en.
ght
T RF NETWORK menu.
" for details of the above setting