Denso BHT-500B User Manual page 105

BHT-500B
[9] Setting the TCP/IP, FTP and DHCP
Use the following procedure to change the TCP/IP, FTP and DHCP settings.
1.
Select "9: TCP/IP" at the SET SYSTEM menu and then press the
ENT key.
The SET TCP/IP menu screen on the right displays.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3]) to
highlight the item to be set, and then press the ENT key.
"1: SET TCP/IP":
"2: SET FTP":
"3: SET DHCP":
Refer to the following section for details of the above items.
Press and hold the BS/C key to return to the SET SYSTEM menu.
 "1: SET TCP/IP": Setting the TCP/IP
1.
Select "1: SET TCP/IP" at the SET TCP/IP menu and then press the
ENT key.
The SET TCP/IP menu screen on the right displays.
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to highlight
the item to be set, and then press the ENT key.
Press and hold the BS/C key to return to the SET TCP/IP menu.
"1: DEVICE": Setting the TCP/IP device
Select "1: DEVICE" at the SET TCP/IP menu to display the screen on the
right where the current settings are displayed.
"1: TCP/IP DEVICE":
"2: LINK LAYER":
"3: TRANSMIT SPEED":
Press and hold the BS/C key to return to the SET TCP/IP menu.
88
Changes the TCP/IP setting.
Changes the FTP setting.
Changes the DHCP setting.
TCP/IP communication device
Link layer
Transmission speed
(when equipped with software supporting
LAN communication)