Denso BHT-500B User Manual page 164

[2] Uploading the system message file
1.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
UPLOAD] and then press the ENT key.
The screen on the right displays indicating that the BHT is waiting for the
system message file to be uploaded.
2.
While the upload is in progress, the screen on the right displays
indicating the file name and the number of sent records/the total
number of records.
Press and hold the BS/C key to abort the upload and return to the SYSTEM
MESSAGE menu.
3.
Upon completion of uploading, the BHT displays the screen shown
on the right and beeps once.
Press and hold the BS/C key to return to the SYSTEM PARAMETER
menu.
The beeper sounds three times if an error occurs during uploading, and an
error screen displays.
Refer to "Chapter 7 Error Messages" - "7.2 System Mode Errors" and
remedy the error.
When uploading the system message file, the BHT creates a
- Point -
temporary file named "_B50MSG.FN4" in the user area. An
error will therefore occur if there is in
user area to create the temporary file.
The created temporary file
uploading is complete.
Barcode Handy Terminal
sufficient space in the
will automatically be deleted afte r
147