Denso BHT-500B User Manual page 34

BHT-500B
Charging with the battery charger (CH-501)
1.
Check the battery cartridge terminals and insert the cartridge.
2.
Connect the CH-501 plug to a commercial AC power source
(230 V AC).
The LED will turn red when charging is commenced.
3.
The LED will turn green when charging is complete.
 Point 


4.
Slide the battery cover lock (1) in the direction shown
by the arrow, and remove the battery cover (2).
18
Charging takes approximately
hours.
An only slightly discharged battery
cartridge should take this time to
become fully charged.
Red LED ON
3
Green LED ON
Terminal