BHT-1500B Series
1.1 System Configuration
This section describes the hardware and software required for the code data collection system using the BHT.
1.1.1
Hardware Configuration
In addition to the BHT, the following hardware and software are required for the code data collection
system using the BHT.
Please note that certain components of the required hardware will differ depending on the type of
communication used.
Host computer
CU-A*1-15 Series (option): Optical communication unit
Connection cable (option): Used to connect the CU and host computer.
®
compatible device (option)
Bluetooth
®
Bluetooth
printer (Option)
(1) Infrared communication
IrDA printer (Option)
● Devices required for system configuration
(1) Infrared communication
(2) Cradle
communication
(3)
®
Bluetooth
wireless
communication
* When the host computer is equipped with the Bluetooth
2
BHT
®
(3) Bluetooth
wireless
communication
CU (Option)
Host
BHT
CU
computer
–
–
–
–
*
(3) Bluetooth
conmunication
(2) Cradle
communication
Connection cable
(Option)
Wireless LAN
Bluetooth® / /Irda
access point
compatible device
–
–
–
®
wireless communication device.
®
wireless
Host computer
(Option)
Ref. Page
Page 33
–
Page 34
Page 35