Denso BHT-500B User Manual page 83

BHT-500B
4.
By executing the BHT-BASIC 4.0 Transfer Utility or similar program,
the screen on the right displays and file uploading is commenced.
(Refer to the "BHT-BASIC4.0 Transfer Utility User's Guide.")
5.
The screen on the right displays during uploading.
The screen on the right displays indicating the file name and the number of
sent records/the total number of records.
(When using the Ymodem protocol, the sent file size/the total file size
(units: KB) displays.)
Press and hold the BS/C key to abort the download process and return to
the UPLOAD menu.
6.
When uploading is complete, the beeper sounds once and the
screen on the right displays.
When
the number of sent records equals the total number of records,
downloading is complete.
(When using the Ymodem protocol, the sent file size equals the total file
size.)
Press and hold the BS/C key to return to the UPLOAD menu.
If "2: ALL FILES" or "3: HT<-->HT COPY" is selected, repeat the above
operation until all files are uploaded.
If an error message displays during uploading, refer to "Chapter 7 Error
Messages".
66