Denso BHT-500B User Manual page 112

 Setting the Barcode Scanning Test Options
When performing the barcode scanning test, press the F1 key to display the
screen on the right, allowing barcode scanning test options to be set.
Details of option settings are as follows.
[1] COMPOSITE: ON/OFF
[2] Add-ON: ON/OFF
[3] Multi-line: ON/OFF
 Multi-line scanning can be performed up to 2 lines, with 9 different
types of code supported (Universal product codes (3 types), ITF,
Codabar, Code39, Code93, Code128, STF)
The highlighted settings will be the current settings.
"1: COMPOSITE": Enables/disables composite code scanning.
"2: Add-on" : Enables/disables add-ons.
"3: MultiLine": Enables/disables multi-line code scanning.
[1] Enabling/disabling composite code scanning
To change this setting, use the cursor keys ([▲] [▼]) [◄] [►]) to highlight the setting value for each item.
Press the F1 key or ENT key to return to the barcode scanning test.
[2] Enabling/disabling add-ons
To change this setting, use the cursor keys ([▲] [▼]) [◄] [►]) to highlight the setting value for each item.
It is not possible to enable both add-ons and multi-line code scanning.
Press the F1 key or ENT key to return to the barcode scanning test.
[3] Enabling/disabling multi-line code scanning
When multi-line code scanning is enabled, the screen on the right displays,
allowing a multi-line code with 2 lines to be set.
1ST: Set the scan code for the first line.
2ND: Set the scan code for the second line.
To change this setting, use the cursor keys ([▲] [▼]) [◄] [►]) to highlight the
setting value for each item.
Press the F1 key or ENT key to return to the barcode scanning test.
Barcode Handy Terminal
95