Denso BHT-500B User Manual page 150

2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
AUTH PARAM (EAP)] and then press the ENT key.
The screen on the right displays.
[1: EAP TYPE]:
[2: IDENTITY]:
[3: ANONYMOUS ID]: Anonymous ID
[4: PASSWORD]:
[5: ROOT CERT]:
[6: CLIENT CERT]:
3.
Use the cursor key ([▲] [▼]) or numerical key ([1]) to highlight [1:
EAP TYPE], and then use the cursor keys
E AP-TLS.
If PEAP is selected, a root certificate is used.
If EAP-TLS is selected, a root certificate and client certificate are used.
4.
Use the cursor keys ([▲
IDENTITY] and then pr
The mode changes to entry mode and the cursor displays.
5.
Use the numerical keys to enter an ID and press the ENT key.
P ress the SF key to change the entry mode (numerical entry (no guidance display) and alphabet entry).
T o delete a single character, press the BS/C key.
Press and hold the BS/C key to delete all entries made.
6.
Use the cursor keys ([▲] [▼]) or numerical key ([3]) to highlight [3: ANONYMOUS ID] and then
press the ENT key.
The mode changes to entry
7.
U se the numerical keys to enter an ID and press the ENT key.
Press the SF key to change t e entry mode (numerical entry (no guid
To delete a single character, press the BS/C key.
Press and hold the BS/C key to delete all entries made.
Selects PEAP or EAP-TLS.
ID
Password
Root certificate
Client certificate
s
([◄] [►]) to select PEAP or
] [▼]) or numerical key ([2]) to highlight [2:
ess the ENT key.
mode and the cursor displays.
h
Barcode Handy Terminal
[▲] key / [▼] key
ance dis play) and alphabet entry).
133