1.1.2 Software Configuration
This section describes the software used for BHT Series application development and application in
addition to the software used at the BHT unit.
Please note that the above-mentioned software can be downloaded (Certain versions may be for trial
use.) from the QBdirect service discussed at "Customer Registration" on page ii.
[1] Application Development Procedure
The procedure for BHT Series program development is as follows.
Program creation
Program generation (compiling and linking)
Program download
Program execution and debugging
[2]
Software Used for Application
BHT-BASIC Programmer's Manual for BHT-500 Series
This is an instruction manual used to create handy terminal programs with BHT-BASIC.
BHT-BASIC 4.0 Development Pack (option)
This is a package containing four software products required for BHT Series application development
and accessories.
The BHT-BASIC 4.0 Development Pack contains the following products.
BHT-BASIC 4.0 Compiler
Compiles and links a source program written in BHT-BASIC 4.0 to create a user program executable
on the BHT (*.PD4).
BHT-BASIC 4.0 Simulator
Performs an operation check for generated application programs (*.PD4) at the computer.
BHT-BASIC 4.0 Remote Debugger
Uses the BHT unit to debug generated application programs (*.PD4) at the computer.
Barcode Handy Terminal
5