Initial Setup - Denso BHT-500B User Manual

BHT-500B

2.4 Initial Setup

Turn ON the power after inserting the fully charged battery cartridge into the BHT.
The clock will not have been set at the time of purchase, and therefore it is necessary to set the date and time when
turning ON the power for the first time.
1.
Press the Power key (
The screen right displays.
2.
Enter the date and time using the numeric keys.
[Ex.] : February 14, 2008, 14:20
Enter the last two digits for the year, and enter the
 Point 
time in 24-hour clock format.
3.
Press the ENT key to set the date and time.
The screen right displays when the date and time are set.
4.
Press numeric key 1 followed by ENT and select [1:Yes].
A scanning demo commences.
The scanning demo is a program that allows barcodes to be scanned without a user program. Press the
trigger switch to enable barcode scanning.
Refer to "Chapter 3 Basic Operation" – "3.1 Scanning Barcodes" and scan a barcode .
By selecting [2:No], the power turns OFF.
 Point 
24
) to turn ON the BHT power.