Nortel Remote Office 9150 Installation And Administration Manual page 95

March 2000
Remote Office 9150 unit
Installation checklist
Check Task
Configure the following items, as required,
to create the communication paths between
the Remote Office 9150 unit and the
MIG RLC:
IP network: MIG RLC's IP address
circuit-switched network:
MIG RLC's telephone number
primary trunk
security level and, if required, security
identifier
Ping the Remote Office 9150 unit and ensure
that it is recognized as a device on the
network.
Ensure that the Remote Office 9150 unit's
connection information is completed on the
MIG RLC.
Configure user stations with appropriate
calling permissions and features.
Configure ports on the MIG RLC.
Installation and Administration Guide
Planning for installation
For details, see
"Using the Configuration
Wizard to perform initial
configuration" on page 141
"Configuring the security
level" on page 235
"Testing the network
connections" on page 155.
the Meridian Internet Gateway
Reach Line Card Installation and
Administration Guide
(NTP 555-8421-210).
"Defining stations" on page 260.
the Meridian Internet Gateway
Reach Line Card Installation and
Administration Guide
(NTP 555-8421-210).
Page 3 of 4
69