Nortel Remote Office 9150 Installation And Administration Manual page 289

March 2000
Local Profile Configuration field descriptions
Field
Auto Hold
Call Forward
Paging
Disabled Outbound
Digit Seq.
Local CPND
Local DN
Installation and Administration Guide
Description
Select Enable if active calls should be automatically put on hold
when another call appearance key is pressed.
Select Disable if active calls should be disconnected when another
call appearance key is pressed.
Select Enable if calls received when a call is already in progress or
is not answered should be forwarded to another extension.
Select Disable if calls should not be forwarded.
Select Enable if this station will be allowed to announce pages.
Select Disable if this station will not be allowed to announce
pages.
If you want to prevent this station from making a certain type of
call, then enter the digits that normally allow that type of call to
proceed.
Example: Enter 1976 to prevent calls to 1-976 numbers.
Note: You can configure only one digit sequence. In order for
calls to be restricted, the dialed number must contain a matching
string at the beginning of the number.
Enter the calling party name display for the user to which the
station is assigned.
Enter the user's local extension number.
Note: If Auto DN Discovery is enabled on the MIG RLC, then
this field is configured to be the same DN as the primary DN
configured on the host PBX for this station.
Configuring the Remote Office 9150 unit
263