Nortel Remote Office 9150 Installation And Administration Manual page 72

Remote Office 9150 description
QoS Transition and Recovery
Threshold
Signal
quality
Y
X
Duration
Threshold (in terms of packet loss and decay)
Duration in seconds
The following table describe the threshold and duration settings shown in the
diagram. These settings are configured on the MIG RLC port to which the
Remote Office 9150 unit is assigned.
Setting
Y
46
Transition to
circuit-switched
network (PSTN)
Z
Description
Represents the threshold representing acceptable signal quality
on the IP network. When signal quality is good, calls continue to
be processed on the IP network.
Signal
Degrade Recovery
X
Z
Standard 1.0
Transition
back to IP
network
Q
Signal
Y
Q
G101427
Remote Office 9150