Overview - Nortel Remote Office 9150 Installation And Administration Manual

Configuring the Remote Office 9150 unit

Overview

Introduction
This section describes the settings that apply to the system rather than to the
Remote Office 9150 trunks or stations.
System identification information
The unit ID and node name are settings that uniquely identify the MIG RLC and
all units that are connected to it.
Note: You can assign a unique ID to each unit in the network. However, this is
not recommended. The valid range of unit IDs is 1 to 255, which limits the size
of your network.
Time and date
The Remote Office 9150 unit obtains its time and date from the host PBX. If the
Remote Office 9150 unit is in a different time zone from the MIG RLC to which
it is connected, you can configure the time zone difference.
Emergency number
If your community has implemented an emergency number service (such as 911)
to call the police, fire department, or ambulance, you can configure that number
on the Remote Office 9150 unit. This allows users in your office to dial the
emergency number and be connected directly to the local emergency dispatch
center through the circuit-switched network. The call is automatically routed
through the local Public Switched Telephone Network (PSTN) without having to
dial a local trunk access code.
212
Standard 1.0
Remote Office 9150