Connection Information-32 Ports - Nortel Remote Office 9150 Installation And Administration Manual

March 2000
Meridian Internet Gateway Reach Line Card
Connection Information—32 ports
Complete one copy of this form for each Line Card.
Reach Line Card information
IPE position:
IP address:
Subnet mask:
Default gateway:
Meridian 1 PBX's ELAN IP address:
Meridian 1 PBX's ELAN subnet mask:
Security level:
If the security level is security code , MIG RLC's security identifier:
Port configuration
Notes:
This Reach Line Card provides 64 digital telephone ports that can be configured as voice or data.
Ports configured as Network connection or Remote user using MCA (for data transmission) or
FAX must be configured on the host PBX with data capability. Ports configured as Remote user
using ATA can be assigned to voice ports if there are not enough free data ports.
If MCAs or ATAs will be used to transmit data, a maximum of seven MCAs or ATAs can be
connected to this Reach Line Card.
RLC port
number Port type
Slot 1
0 Network connection
Remote user
Local telephone
Installation and Administration Guide
Loop:________ Shelf: _______________
No security is required
MCA, ATA,
or FAX?
Yes
No
Caller ID
PSTN number IP address
(if Network (if Network
port) port)
Planning forms
Page 1 of 8
Card:____________
Security Code
Security ID
(if Network
port)
449