Nortel Remote Office 9150 Installation And Administration Manual page 244

Configuring the Remote Office 9150 unit
Field
Local SwitchOver
SPRE Codes: Online
SPRE Codes: Paging
218
Description
Select Enable to automatically route through the Remote
Office 9150 unit, the voice path for local station-to-station
calls that are made on the host call appearance key.
The signaling data is routed through the host PBX.
However, the voice path is routed through the Remote
Office 9150 unit to
prevent tromboning between the MIG RLC and
Remote Office 9150 unit
save connection bandwidth
Select Disable to route the voice path through the PBX.
Enter the SPRE code that is used to put your site into
online mode, or accept the default. The default is #99.
Note: The SPRE code is automatically prefixed with the
pound sign (# in North America). This means users must
dial # before the SPRE code when going into online mode.
Maximum length: 3 digits in addition to the pound sign
Enter the SPRE code that is used to announce pages to
other stations in your office, or accept the default code.
The default is #05.
Note: The SPRE code is automatically prefixed with a
pound sign (#). This means users must dial # before the
SPRE code when initiating a page.
Maximum length: 3 digits in addition to the pound sign
Standard 1.0
Remote Office 9150