Installation Checklist - Nortel Remote Office 9150 Installation And Administration Manual

March 2000
Remote Office 9150

Installation checklist

Use this checklist to ensure that all installation tasks are completed.
Check Task
Review the Release Notes for last-minute
product updates.
Ensure you have the latest firmware and
software.
You can route calls over the IP network, the
circuit-switched network, or both.
Determine, at a high level, what you must do
to implement these call routing methods.
If you want to use the IP network to route
calls, evaluate the IP network to determine if
the network infrastructure can support voice
traffic.
If you want to use the circuit-switched
network to route calls, order trunks from the
central office to the Remote Office 9150 unit
site.
Note: The Remote Office 9150 unit supports
ISDN BRI trunks (S/T or U interface).
Obtain the cables that you need to establish
the network connections.
Decide on the administration PC setup.
Installation and Administration Guide
Planning for installation
For details, see
Remote Office and
MIG RLC Release Notes
(NTP 555-8421-102).
Remote Office and
MIG RLC Release Notes
(NTP 555-8421-102)
"Deployment options" on page
97.
your data network
administrator
Appendix A, "Network
engineering guidelines"
"ISDN BRI information" on page
102.
"Cables you must supply
yourself" on page 74.
"Administration PC" on page 76.
Page 1 of 4
67