Nortel Remote Office 9150 Installation And Administration Manual page 60

Remote Office 9150 description
Station priority
One of the following priority levels can be assigned to each station:
high
normal
circuit only
IP only
The priority level is defined on the MIG RLC port to which the station is
assigned. For more details, see "Station priority" on page 52.
Local calling
The Remote Office 9150 unit allows you to place calls to other extensions within
your office, or to telephones in your local community. This is accomplished
through the use of up to two local call appearance keys.
Note: If a user initiates the call from the host call appearance key, the
station-to-station call requires transmission of signaling data through the host
PBX.
Online/offline table
The online/offline table is configured on the MIG RLC and allows you to
schedule times
when the Remote Office 9150 unit's ISDN BRI connection to the host PBX
can be active
Note: When the Remote Office 9150 unit is in offline mode, users cannot
make or receive calls through the host PBX over the IP or circuit-switched
network.
when all telephones in your office can use only the local PSTN service
This allows you to ensure that costly ISDN BRI telephone calls through the host
PBX are disabled after business hours.
34
Standard 1.0
Remote Office 9150