Nortel Remote Office 9150 Installation And Administration Manual page 138

Installing the Remote Office 9150 unit
Check Item
4
Visually inspect each item for obvious faults or damage.
What to do if damage is found
If any component is damaged, report the damage immediately to your
Nortel Networks distributor and the carrier who delivered the equipment.
What's next?
When you have verified that all components are present and are undamaged, do
the following:
Install DSP application and trunk interface modules, if required.
For instructions, see "Installing a trunk interface or DSP application
module" on page 116.
Install the Remote Office 9150 unit in its chosen location.
For instructions, see "Mounting the Remote Office 9150 unit" on page 122.
112
Remote Office and MIG RLC Release Notes
(NTP 555-8421-102)
Remote Office Product CD-ROM
Standard 1.0
Remote Office 9150