Nortel Remote Office 9150 Installation And Administration Manual page 288

Hide thumbs Also See for Remote Office 9150:

Table of Contents

Configuring the Remote Office 9150 unit

Generally, the Remote Office 9150 port and MIG RLC port should

match to simplify configuration and administration.

If the station is equipped with an MCA or ATA for data transmission, or if

the port is used for fax, the MIG RLC port must be configured on the

host PBX with data capability.

If you selected Local or Local & Remote, click Configure for the port you are

configuring.

Result: The Local Profile Configuration dialog box appears.

Complete the fields as described in "Local Profile Configuration field

descriptions" on page 263.

Once you have completed the Local Profile Configuration, click OK.

Result: The 9150 Device Configuration sheet reappears. The

configurations you set are displayed in the port's Description box.

Standard 1.0

Remote Office 9150