Configuring the Remote Office 9150 unit
3
Accept the default RLC Port to which this station is assigned, or enter a
new RLC port number.
Notes:
Generally, the Remote Office 9150 port and MIG RLC port should
match to simplify configuration and administration.
For fax transmissions, the MIG RLC port must be configured on the host
PBX with data capability.
4
If you selected Local or Local & Remote, click Configure for the port you are
configuring.
Result: The Local Profile Configuration dialog box appears.
5
Click Disable under Local Features for the following:
Auto Hold
Call Forward
Paging
6
If applicable, enter the digits that prevent a certain type of call from
proceeding in the Disabled Outbound Digit Seq. box.
7
In the Local CPND box, enter a description (for example, FAX).
8
Enter the number used to ring the fax machine in the DN box.
268
Standard 1.0
Remote Office 9150