Nortel Remote Office 9150 Installation And Administration Manual page 273

March 2000
To configure trunk groups
1 Complete the fields as described in "Trunk Group Configuration field
descriptions" below.
2 Click OK to save the information in the temporary work file.
3
To update the Remote Office 9150 unit with the new information, click
Send.
IF you are
logged on to the
Remote Office 9150 unit
not logged on to the
Remote Office 9150 unit
Trunk Group Configuration field descriptions
Field
Group No
Status
Installation and Administration Guide
THEN
the changes are written into the Remote
Office 9150 unit's buffer.
To save the changes in flash memory, choose
Upload/Download
the following dialog box appears:
Do one of the following:
Log on to the Remote Office 9150 unit,
and then click Send again.
Save the changes to a file on your
administration PC.
Description
Select a group number. You can create up to ten groups.
Select Enable to activate the trunk group.
Select Disable to deactivate the trunk group.
Configuring the Remote Office 9150 unit
Save to Flash.
247