Nortel Remote Office 9150 Installation And Administration Manual page 63

March 2000
Security identifier
You can use security identifier authentication over the IP or circuit-switched
network. When security identifier is used, the Remote Office 9150 unit sends its
security identifier (password) for each connection request. The MIG RLC
compares the identifier configured on the MIG RLC port to which the Remote
Office 9150 unit is assigned. If the identifiers match, access is granted.
If the identifiers do not match, an event is recorded in the Remote Office 9150
unit system log, which can be viewed in Configuration Manager. The telephone
that was used to make the call displays a message indicating that
communications with the host PBX are down.
Installation and Administration Guide
Remote Office 9150 description
37