Rear Wheel - Buell S1 Lightning Workshop Manual

REMOVAL
1. Raise rear wheel off floor using
PORT STAND (Part No. B-41174).
2. Remove rear fender. See
INSTALLATION on page
3. Remove rear brake caliper. See
PER, REMOVAL/DISASSEMBLY
NOTE
Do not operate rear brake pedal with rear wheel removed or
caliper piston may be forced out. Reseating piston requires
caliper disassembly.
4. See Figure 2-8. Loosen rear axle nut (metric).
5. Loosen rear axle adjuster nuts. Push wheel as far for-
ward as possible.
6. Slip secondary drive belt from bottom of rear wheel
sprocket and remove.
7. See Figure 2-9. Remove rear axle nut (14) (metric), lock-
washer (13), and washer (12). Pull axle (3) and washer
(4) out from left side and remove wheel.
b0013a2x
16
17
10
9

REAR WHEEL

REAR WHEEL SUP-
FENDERS, REMOVAL/
2-54.
REAR BRAKE CALI-
on page 2-25.
15
8
12
13
14
Figure 2-9. Rear Wheel
5574
nut (metric)
Axle adjuster nut
Figure 2-8. Rear Wheel Mounting
1
2
4
5
6
7
11
Rear axle
3
1. Screw (4) (metric)
2. Rear brake rotor
3. Rear axle
4. Washer
5. Wheel bearing
6. Spacer sleeve
7. Wheel
8. Valve stem
9. Wheel weight
10. Bearings (2)
11. Right axle spacer
12. Washer
13. Lockwasher
14. Axle nut (metric)
15. Belt sprocket
16. Washer (5)
17. Bolt (5)
2-11