Buell S1 Lightning Workshop Manual page 246

ITEM
Access door mounting bolts
Clutch inspection cover
TORX screws with washers
Clutch mainshaft nut
Countershaft retainer
TORX screw
Engine sprocket nut
Isolator bolts
Primary chain adjuster locknut
Primary chain adjuster locknut
Primary chain inspection
cover screws
Primary cover bolts
Rear shock mounting bolts
Shift lever pinch screw
Shifter shaft assembly nuts
Tie bar bolts
Transmission detent plate nut
Transmission drain plug
Transmission sprocket nut
Transmission sprocket screws
6-2
TORQUE
13-17 ft-lbs 18-23 Nm
7-9 ft-lbs 9-12 Nm
70-80 ft-lbs 95-108 Nm
13-17 ft-lbs 18-23 Nm
150-165 ft-lbs 203-224 Nm
135.6-149.1
100-110 ft-lbs
Nm
10-12 ft-lbs 14-16 Nm
20-25 ft-lbs 27-34 Nm
40-60 in-lbs 4.5-6.8 Nm
80-110 in-lbs 9.0-12.4 Nm
40-45 ft-lbs 47.5-61.0 Nm
100-120
11.3-13.6 Nm
in-lbs
90-110 in-lbs 10.2-12.4 Nm
30-33 ft-lbs 40.7-44.7 Nm
13-17 ft-lbs 18-23 Nm
14-21 ft-lbs 19-28 Nm
See note
90-110 in-lbs 10.2-12.4 Nm
NOTES
LOCTITE THREADLOCKER 242 (blue),
page 6-3
LOCTITE THREADLOCKER 262 (red), left hand
threads, page 6-13
LOCTITE THREADLOCKER 242 (blue),
LOCTITE THREADLOCKER 262 (red),
LOCTITE THREADLOCKER 262 (red),
on interior of chaincase, page 6-4
on exterior of chaincase, page 6-4
page 6-3
3 lengths, page 6-5
metric, page 6-7
page 6-5
same torque for top and bottom nuts,
page 6-7
page 6-19
page 6-5
LOCTITE THREADLOCKER 262 (red), left hand
threads, special torque turn method,
replace after 3 removals, page 6-31
page 6-30
page 6-25
page 6-13
page 6-7
page 6-30
page 6-30