Buell S1 Lightning Workshop Manual page 40

PRODUCT REFERENCES
1
WARNING
Follow the directions listed on all products. Carefully
read all labels, warnings and cautions before use.
Inadequate safety precautions may result in personal
injury.
When reference is made in this Service Manual Supplement
to a specific brand name product, tool or instrument, an
equivalent product, tool or instrument may be substituted.
Kent-Moore Products
All tools mentioned in this supplement with an "HD", "J" or "B"
preface must be ordered through:
Kent-Moore
SPX Corporation
29784 Little Mack
Roseville, Michigan 48066-2298
Telephone: 1-800-345-2233
Sealing and Threadlocking Products
LOCTITE PRODUCTS
Some procedures call for the use of Loctite
have any questions regarding Loctite product usage or
retailer/wholesaler locations, please call Loctite Corp. at 1-
800-323-5106.
CONTENTS
All photographs and illustrations may not necessarily depict
the most current model or component, but are based on the
latest production information available at the time of
publication.
Since product improvement is our continual goal, Buell
reserves the right to change specifications, equipment or
designs at any time without notice and without incurring
obligation.
Buell products are manufactured under one or more of the following patents: U.S. Patents – 2986161, 2987934,
2998809, 3116089, 3144531, 3144860, 3226994, 3229792, 3434887, 3559773, 3673359, 3709317, Des. 225 626.
ii.
WARNINGS AND CAUTIONS
Statements in this supplement preceded by the word
1
" WARNING" or "
these items alert you to situations where the possibility of
personal injury or vehicle damage exists, please take special
notice of them.
A "WARNING" indicates the potential for personal injury,
whether to yourself or others.
A "CAUTION" indicates that vehicle damage can occur.
Proper service and repair is important for the safe,
reliable operation of all mechanical products. The
service procedures recommended and described in
this Service Manual are effective methods for
performing service operations. Some of these
service operations require the use of tools specially
designed for the purpose. These special tools should
be used when and as recommended. It is important
to note that some warnings against the use of
specific service methods, which could damage the
motorcycle or render it unsafe, are stated in this
Service Manual. However, please remember that
these warnings are not all-inclusive.
®
products. If you
Since Buell could not possibly know, evaluate or
advise the service trade of all possible ways in which
service might be performed, or of the possible
hazardous consequences of each method, we have
not
Accordingly, anyone who uses a service procedure
or tool which is not recommended by Buell must first
thoroughly satisfy himself that neither his nor the
operator's safety will be jeopardized as a result.
Wear eye protection when using hammers, arbor or
hydraulic presses, gear pullers, spring compressors,
slide hammers and similar tools. Be especially
cautious
compressing equipment. The forces involved can
cause parts to fly outward with considerable force,
possibly resulting in personal injury.
1
CAUTION" are very important. Since
1
WARNING
1
CAUTION
1
WARNING
undertaken any such
when using pulling,
broad evaluation.
pressing or